Estimate what building your home will cost, broken down by quality, location, and category — before you finalise a budget or approach a contractor.
The Project
Construction Quality
Location
Fees & Charges
Cost breakdown by category
Where the money goes
Base rate is per sq ft of built-up area, adjusted for location and a small per-floor structural loading factor. The category breakdown splits the base construction cost using typical Indian residential proportions; architect fees, contingency, and GST are then added on top. Actual costs vary by design, site conditions, material choices, and contractor — treat this as a starting estimate, not a quote.
Construction cost per square foot is the single biggest lever in any build budget, and it moves with three things: the quality tier you choose (materials, fittings, finishes), the location multiplier (labour and material transport costs vary by tier-of-city), and structural loading — taller builds need stronger foundations and columns, which adds cost even at the same built-up area.
On top of the base construction cost, most Indore builds also carry architect/design fees, a contingency buffer for price escalation during the build (materials like steel and cement fluctuate), and GST — all of which this calculator adds on top of the base rate.
Standard RCC structure, basic tiles and fittings, economy paint and doors. Functional, no-frills build.
Better quality tiles, branded sanitary fittings, modular kitchen provision, decent electrical and plumbing.
Vitrified/wooden flooring, premium fittings, false ceiling, better-grade doors and windows, upgraded electrical.
Imported/high-end finishes, designer fittings, home automation provisions, architectural detailing.
Base Construction Cost = Built-up Area × Quality Rate × Location Multiplier × Floor Loading FactorArchitect Fees = Base Construction Cost × Architect Fee %Contingency = Base Construction Cost × Contingency %Subtotal = Base + Architect Fees + ContingencyGST = Subtotal × GST %Grand Total = Subtotal + GST
The category breakdown splits base construction cost using typical Indian residential proportions: structure & RCC (~35%), masonry & brickwork (~15%), finishing — flooring, painting, doors/windows (~25%), plumbing & electrical (~15%), and fittings & miscellaneous (~10%).
Steel and cement prices swing during long builds — locking rates or timing bulk purchases can meaningfully reduce your final contingency spend.
An 8–10% contingency is typical for a well-planned build; under-budgeting here is one of the most common causes of construction cost overruns.
Mid-construction design changes are the costliest kind of change — finalising floor plans and fittings upfront avoids rework.
Upgrading from Standard to Premium can raise your total cost by 25–30% — decide tier-by-room if budget is tight (e.g., premium kitchen/bath, standard elsewhere).
GST on construction materials and contractor services adds a meaningful percentage — factor it into your budget from day one, not as an afterthought.
If you may add a floor later, design the foundation for the final load now — retrofitting a stronger foundation after the fact is far more expensive than building it in.
Construction cost in Indore typically ranges from around ₹1,400/sqft for a basic build to ₹3,200/sqft or more for a luxury build, before adding architect fees, contingency, and GST. Location and floor count also affect the final rate.
Yes, slightly. Taller structures need stronger foundations and columns to support additional floors, which is reflected here as a small per-floor structural loading factor on the base rate.
Not always — some contractors quote base construction cost separately from GST. Always confirm whether a quote is inclusive or exclusive of GST before comparing contractors.
An 8–10% contingency is a reasonable starting point for most residential builds, covering material price escalation and minor scope changes during construction.
Typically structural design, architectural drawings, and site supervision. Fees usually range 3–8% of construction cost depending on the architect and scope of involvement.
No. This tool gives a starting estimate based on typical rates and proportions. Actual costs depend on design complexity, site conditions, material choices, and the contractor — always get a detailed quote before finalising your budget.
Our team can connect you with vetted contractors and give you a locality-specific cost review before you break ground.